Total Energy Probe DN
with end piece ST1 8|30 mm
Part No.: TO1001
The measuring head is very precise and insensitive to sliding and pitching. For this purpose, this design should be aligned horizontally (parallel to the wings) according to the measurement results in the wind tunnel. It retains balanced over a wide range of speed. The end piece on this probe is compatible with ST1 and also with SUN adapters while using a wTEK insert! The version delivered since 11/2017 has a further improved measuring head.
Note: Images and drawings are similar. Certain differences are caused by manual production or further development.
|Total length||735 mm|
|End piece||ST1 8|30 mm|
|Socket (Adapter)||ST1, SUN with insert wTEK|