Multi Probe DN/StaTEK
with end piece ST2
Part No.: MU1000
A dual probe that provides a very balanced TEK and an almost interference free static pressure. The measured values in the wind tunnel show slightly better results with horizontal TE acceptance. Because of the increased volume for the TE in the shaft, this design is better suited for extreme cloud flying than other multiprobes. The version manufactured since 1/2018 has a further improved TE measuring head. Attention: This probe may only be tested for leak tightness by means of vacuum, compressed air can destroy the inner tubing!
Note: Images and drawings are similar. Certain differences are caused by manual production or further development.
|Total length||870 mm|
Nickel Plated Brass
Black Anodized Aluminium
|Socket (Adapter)||ST2, SUN with insert wStaTEK|