Mounting Adaptor UNG
with end piece B = with a hole, for external mounting support
Part No.: AD1005
The mounting adaptor UNG is a multi-adapter and distributes three different pressures to three hose fittings. Two milled holes in the front side enable the use of curved probes while using a spin lock. UNG adaptors are generally mounted with an inclination in the vertical fin depending on the plane. End piece B = with a mounting hole at the back. Tip: the system adaptor should be installed with the hose fittings oriented upwards to prevent the ingress of water into the system. Should the O – rings, over time no longer be airtight, they can be removed and replaced by using a special tool that you can borrow from us. For details please refer back to the “service” page on our website.
Note: Images and drawings are similar. Certain differences are caused by manual production or further development.
|Total length||115 mm|
Nickel Plated Brass
|End piece||B = with a hole, for external mounting support|
|Inner diameter||8 mm|