Mounting Adaptor UNG
with end piece A
Part No.: AD1004
PRODUCT DESCRIPTION
The mounting adaptor UNG is a multi-adapter and distributes three different pressures to three hose fittings. Two milled holes in the front side enable the use of curved probes while using a spin lock. UNG adaptors are generally mounted with an inclination in the vertical fin depending on the plane. End piece A = no mounting hole, straight back. Tip: the system adaptor should be installed with the hose fittings oriented upwards to prevent the ingress of water into the system. Should the O – rings, over time no longer be airtight, they can be removed and replaced by using a special tool that you can borrow from us. For details please refer back to the “service” page on our website.
Note: Images and drawings are similar. Certain differences are caused by manual production or further development.
PRODUCT DETAILS
Total length | 110 mm |
Weight | 63 gr |
Material |
Nickel Plated Brass
FKM 70 |
End piece | A |
Pickup | 3-fach |
Inner diameter | 8 mm |