Mounting Adaptor UN
with end piece A
Part No.: AD1003
PRODUCT DESCRIPTION
The mounting adaptor UN is a multi-adaptor and distributes three different pressures to three 6 mm hose fittings. Unlike the mounting adaptor SUN, it can be fitted with probes ending with /UN. Carbon probes with ending /UN can be additionally fitted with a spacer sleeve to close a visual 20 mm gap. End piece A = no mounting hole, straight back. Tip: the system adaptor should be installed with the hose fittings oriented upwards to prevent the ingress of water into the system. Should the O – rings, over time no longer be airtight, they can be removed and replaced by using a special tool that you can borrow from us. For details please refer back to the “service” page on our website.
Note: Images and drawings are similar. Certain differences are caused by manual production or further development.
PRODUCT DETAILS
Total length | 105 mm |
Weight | 62 gr |
Material |
Nickel Plated Brass
FKM 70 |
End piece | A |
Pickup | 3-fach |
Inner diameter | 8 mm |