Mounting Adaptor SUN
with end piece B = with a hole, for external mounting support
Part No.: AD1001
PRODUCT DESCRIPTION
The mounting adapter SUN is a multi-adapter and distributes three different pressures to three 6mm hose fittings. Unlike the UN mounting adapter, it can be fitted with probes ending with /UN and additinally with /ST1 -30mm and /ST2. To make this possible, a single interchangeable insert (wTEK) or double (wStaTEK) can be plugged into the adapter. The unused port of the adapter is thereby shut down for the duration of use. End piece B = with a mounting hole at the back. Tip: the system adapter should be installed with the hose fittings oriented upwards to prevent the ingress of water into the system. Should the O – rings, over time no longer be airtight, they can be removed and replaced by using a special tool that you can borrow from us. For details please refer back to the “service” page on our website.
Note: Images and drawings are similar. Certain differences are caused by manual production or further development.
PRODUCT DETAILS
Total length | 125 mm |
Weight | 63 gr |
Material |
Nickel Plated Brass
FKM 70 |
End piece | B = with a hole, for external mounting support |
Pickup | 3-fach |
Inner diameter | 8 mm |